Last Modified: 11-29-2007 1.6 A
Service Category: Vehicle Exterior Section: Door/Hatch
Model Year: 2008 Model: Sequoia Doc ID: RM0000035F5003X
Title: DOOR / HATCH: POWER BACK DOOR TOUCH SENSOR (for LH Side): INSTALLATION (2008 Sequoia)

INSTALLATION

1. INSTALL POWER BACK DOOR SENSOR LH

(a) Install the power back door sensor with the 2 clips and 6 screws.

(b) Connect the connector.

2. INSTALL BACK DOOR SERVICE HOLE COVER DOOR / HATCH: BACK DOOR: REASSEMBLY (2008 Sequoia)+

3. INSTALL BACK DOOR TRIM BOARD ASSEMBLY DOOR / HATCH: BACK DOOR: REASSEMBLY (2008 Sequoia)+

4. INSTALL BACK DOOR PULL STRAP DOOR / HATCH: BACK DOOR: REASSEMBLY (2008 Sequoia)+

5. INSTALL BACK DOOR STRAP COVER DOOR / HATCH: BACK DOOR: REASSEMBLY (2008 Sequoia)+

6. INSTALL BACK DOOR SIDE GARNISH LH DOOR / HATCH: BACK DOOR: REASSEMBLY (2008 Sequoia)+

7. INSTALL BACK DOOR SIDE GARNISH RH DOOR / HATCH: BACK DOOR: REASSEMBLY (2008 Sequoia)+

8. INSTALL BACK DOOR CENTER GARNISH DOOR / HATCH: BACK DOOR: REASSEMBLY (2008 Sequoia)+

9. INSTALL POWER BACK DOOR ROD DOOR / HATCH: BACK DOOR: REASSEMBLY (2008 Sequoia)+